Question 1

How to remove speed limit (de-restriction) for Kommoda

Accepted Answer

Due to safety and local law reason, we have limited the motor and speed to 250W and 15mph, if you would like the 750W with no speed limit, please follow the instruction video and text below:

'Unplug the speed limiting cable for Kommoda'
https://www.youtube.com/watch?v=XK4uUOwrTnw

Step 1:
Remove the bolt with Allen key screwdriver and take out the controller in the frame.

Step 2:
Unplug the speed limit cable:

Step 3:
Now you're able to enjoy the full speed of the bike.

Updated on: 28/07/2022

Question 2

Error Code 10 - How to identify the problem when there's E10 code on your bike computer

Accepted Answer

Articles on: Toubleshooting

This article is dedicated to identifying the problems when you encounter the error code 10 situation.
Here's what it is like to have an error code 10 on the bike computer:

Please take the following diagnosis step to identify the problem, whether it's a sensor or controller, or motor issue, the steps have been proved a success in multiple cases.

Diagnosis Step:

Remove the crankarm and pull out the PAS sensor
First, we need to check all the cable connections are tight and OK, and then remove the crankarm in order to pull out the PAS cadence sensor

'Crank Arm And PAS Sensor Removal For All Cyrusher Models':
https://www.youtube.com/watch?v=KZKj8auQbh4&t=1s

Try use the throttle to start the motor.
After pulling out the sensor, try to use the throttle to start the bike, if the bike cannot be activated and error code 10 still exists, then we need to change a new controller (please contact Cyrusher support for a new controller replacement)

'Cyrusher XF650/XF900 Controller Replacement'
https://www.youtube.com/watch?v=IR8kElLJ-3s

Change the motor if a new controller cannot fix the problem.
If changing the controller still cannot solve t

Question 3

How to solve Cyrusher XF800 Motor Brake Cut Sensor Issues

Accepted Answer

Articles on: Toubleshooting

If there shows the circle to the right of the battery (next to the TTM) on your bike computer which should only show when the brakes are engaged and that automatically cuts power to the motor which is why your throttle won’t be engaging. So the system thinks the brakes are engaged.

How to solve it ?

You need to disconnect the power cut off cable one by one and use the throttle to test which brake lever power-cut-off screw need to be adjusted.
Use pliers or similiar tools(such as a small wrench) to adjust the power-cut-off screw tightness/tension at the bottom part of the brake lever accordingly.
Turn on bike computer to see whether the brake singal still shows up when you release the brake lever ; if not, then throttle to tes the motor will engage or not; if still shows up, do the step 2 again.

1) E-bikes orders

Returns are not allowed after fourteen (14) days of the delivery date.
To be eligible for a return, the E-bike can not be defective or damaged and you must contact Cyrusher within fourteen (14) days of your receipt of the E-bike. The E-bike must have less than ten (10) miles on the odometer, be free of any wear and tear, dirt, dust, fragrance, or any other signs of use. It must also be in the same packaging and condition that you received it in and must include all items that were inside the box including:

Battery
Keys
Charger
Hardware (Pedals or tools)
Fenders
Seat and seat post
Bike and all electrical components
Rack (if

Question 5

How to test the voltage of the battery?

Accepted Answer

Articles on: Toubleshooting

We have a detailed video on how to test the voltage of the battery and charger:
https://www.youtube.com/watch?v=MUu-9tsvSQA

This article is dedicated to showing how to test the voltage of the battery by using a voltmeter.

When you have encountered the following situation, we might need you to test the battery's voltage for us to identify the problem:
-Battery cannot be charged.
-Range is reducing.
-Battery life is reducing.

Prepare:

To test your e-bike battery, the only tool you’ll need is called a multimeter.
A multimeter is a simple electrical measuring instrument that’s cheap and easy to get. You can find them on Amazon.

Execute:

Turn on your multimeter and set it to DC Mode (200VDC)

Put the negative probe (the black one) on the battery charging port 1 and put the positive probe (the red one) on battery charging port 3 (see picture)

![](https://storage.crisp.chat/users/helpdesk/website/3a1c4863728a1800/0d8e9fa5-6219-45f8-9d8c-1d1

Question 6

Cyrusher Ovia Assembly Guide

Accepted Answer

Articles on: Assembly Guide

Ebike Assembly Guide Video

User Manual Files

Cyrusher Ovia User Manual
Ovia Airshock Manual

Updated on: 06/06/2023

Häufig gelesene Beiträge

Alle Kategorien durchsuchen